Q1. The VXL AN fabric is deployed with this configuration: The VL AN 50 interface has no IP address on VTEP1 and VTEP4. The VLAN 100 interface has no IP address on VTEP2 and VTEP3. nve1 interface is configured on all VTEPs. Host A experiences timeouts when attempting to ping host B. Which set of actions allows host A to reach host B7
A.On VTEP1, associate VNI 30000 to Test_ Telco VRF. On VTEP4, associate VNI 20000 to Test_ Telco VRF.
B. On VTEP2, associate VNI 55000 to Test Telco VRF. On VTEP4, associate VNI 50000 to Test Telco VRF.
C. On VTEP1, associate VNI 50000 to Test Telco VRFOn VTEP4, associate VNI 50000 to Test Telco VRF.
D. On VTEP2, associate VNI 30000 to Test Telco VRF On VTEP4, associate VNI 20000 to Test Telco VRF
Correct Answer: C
Q2. The VXL AN fabric is deployed with this configuration: The VL AN 50 interface has no IP address on VTEP1 and VTEP4. The VLAN 100 interface has no IP address on VTEP2 and VTEP3. nve1 interface is configured on all VTEPs. Host A experiences timeouts when attempting to ping host B. Which set of actions allows host A to reach host B7
A.On VTEP1, associate VNI 30000 to Test_ Telco VRF. On VTEP4, associate VNI 20000 to Test_ Telco VRF.
B. On VTEP2, associate VNI 55000 to Test Telco VRF. On VTEP4, associate VNI 50000 to Test Telco VRF.
C. On VTEP1, associate VNI 50000 to Test Telco VRFOn VTEP4, associate VNI 50000 to Test Telco VRF.
D. On VTEP2, associate VNI 30000 to Test Telco VRF On VTEP4, associate VNI 20000 to Test Telco VRF
Correct Answer: C
Q3. Refer to the exhibit. The FCoE traffic fails to traverse the vfc2 interface. The VSAN 102 is configured for vfc2. Which action resolves the issue?
A.Enable LLDP on the interface vfc2
B. Activate DCBX on the N9K switch
C. Activate DCBX on the interface e101/1/2
D. Enable LLDP on the neighbor switch
Correct Answer: D
Q4. An engineer is implementing, Fibre Channel (FC) switching on a Cisco 9000 Series Switch, but the procedure fails with the message "FC traffic is not being routed through the fabric.". Which action resolves the issue?
A.Configure the FSPF for VSAN 10 on the NX9k-01-LAB switch.
B. Set the FSPF interface link cost to be less than 30,000 in the IVR path.
C. Set the FSPF hello interval on fc12 interface the NX9k-01-LAB switch.
D. Configure the VSAN ID 10 on the link connected to fc1/12.
Correct Answer: C
$ 39
Reviews
There are no reviews yet.